Check Out Our Work in Stone Mountain GA
Chen Plumbing provides air conditioning, heating, water heater and plumbing services to the residents of Stone Mountain, GA and the surrounding areas since 1998!
Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Stone Mountain, GA.
Recent Jobs and Reviews in Stone Mountain, GA
Stone Mountain, GA at a glance
Chen Plumbing has completed 3 jobs in Stone Mountain, GA between August 2024 and September 2024.
The most recent job was on September 11, 2024.
Chen Plumbing has completed 176 jobs in Stone Mountain, GA in the last 12 months. The first job there was in August 2023.
Job Locations and Reviews
For this job, I work on replacing leaking relief valve on water heater and also replaced high pressure regulator valve.
Customer had leak of unknown origin causing damage in kitchen. Reliable recommended us to find leak. Found leak coming from dishwasher by kitchen sink. Shut off water at the stop to stop the leak until reliable could come back out. Unjammed the garbage disposal for the customer and cleaned the Ptrap under the kitchen sink. Ran a closet auger through trap of hall bath to restore flow to the shower. Pipe takes a sharp turn after trap and couldn’t let the auger go through, but ran auger multiple times through trap to restore flow. If any additional issues occur with the shower drain, then additional cleaning or repair measures may need to be taken to restore flow. Left quote to pull toilet and inspect the flange.
Price is to cap the both traps in double wye below floor. Drill new hole in bottom of kitchen cabinet and floor to reroute line to pvc below floor. Will replace 3 inch pvc wye and cut back 2 inch pvc to connect to 3 inch pvc to meet code requirements. Will cap copper line at the wall. Below cabinet and leave the vent stack intact. Returned and cut out cast double wye. Reconnected to the existing vent and capped the old lead drain line coming out under the cabinet. Put a new two inch pvc line through the floor with a new studor vent. Reconnected to existing three inch cast and 2 inch pvc coming from washing machine line. Points out sloping issues stressing a fernco from washing machine line to customer. The pipe is back sloped on washing machine and making it difficult to get a highly positive slope from the wye fittings that were installed. Customer is aware of issue and declined further work to correct the slope at this time. Tested all work to ensure proper function and no leaks.
